Cleco 35PHH Series, Инструкция по эксплуатации

Страница: 15 / 40

1994c_Wartung_en-bedingt.fm, 12.06.2014
P1993BA/EN 2014-06 15
Maintenance
5
5 Maintenance
5.1 Service schedule
Regular service reduces operating faults, repair costs and downtime.
This maintenance schedule uses values that are valid for most applications. For a specific maintenance
interval, see 5.1.1 Calculating a customer-specific maintenance plan, page 16.
Implement a safety-related maintenance program that takes the local regulations for repair and mainte-
nance for all operating phases of the tool into account.
CAUTION!
Danger of injury due to unintentional activation
– before service, disconnect the tool from the compressed air supply.
Maintenance
interval Rundowns Measures
W1 100.000  Check the suspension bail for functional safety.
 Check the air hose for wear.
 Check the square on the output drive for wear.
 Check the air inlet for tight fit.
 Check the housing of the pulse unit for tight fit.
 Check the maximum idling speed.
 Check the reserve oil.
W2 500.000  Oil change, see 5.3 Complete oil filling, page 18.
 Motor service kit, see 3) Part of motor service kit K1 order
no. 936168, page 29.
 Hydraulic service kit, see 3) Part of hydraulic service kit K2,
order no. 936211, page 35.
 Replace muffler, filter.
W3 1.000.000 Check individual parts and replace if necessary
 Suspension bail
 Throttle valve
 Exhaust air throttle
 Motor
 Pulse unit