ClearOne interact at, Руководство пользователя, Страница: 28 / 68

Chapter 2: Getting Started 23
SERIAL COMMANDS
The INTERACT Serial Commands guide can be found as a separate document.
The document contains a list of applicable Serial Commands for the INTERACT AT and INTERACT Pro
models, along with their uses and applications.
Connecting with Telnet
Users can connect to any unit via RS-232 and Telnet. Available Telnet commands are the same as those
used in the Serial Command section of the INTERACT Serial Commands guide.
h
ow To
C
onneCT wiTh
T
elneT
:
• Use the Client of your choice
• Telnet uses Port 23
• The Username and Password are the same as used by INTERACT. The default username is “ clearone “
and the default password is “ interact ” - both lowercase.
» NOTE : The INTERACT Pro 8i cannot be controlled through RS-232 and Telnet.
Pin# User Definable Control
1 N DCD
2 N TXD
3 N RXD
4 N DTR
5 N Ground
6 N DSR
7 N CTS
8 N RTS
9 N No Connection
»
NOTE : To avoid communication errors, ClearOne recommends using all nine pins when
connecting to the RS -232 port.