DIALER - INTERACT AT
In addition to the INTERACT Controller, you can manage calls through the Dialer in INTERACT
Software. You can dial a number, redial the last dialed call, and disconnect calls. You can also use
flash settings, mute the microphones and adjust call volume.
Making and Receiving Calls
Open the Dialer
Note
: A connection must be present for the dialer to work on the AT. A connection is
not necessary for the INTERACT PRO.
l
Click the Dialer icon on the configuration screen.
Make a call
1. Click the
ON/OFF
key. You will hear a dial tone.
2. Dial the number as you would on a standard phone. The number appears on the LCD screen
as it dials.
Call a Phonebook number
Note
: You can also pre-dial the number and then press the
ON/OFF
key to connect
the call. Press and hold the pound key (
#
) to enter a pause in the dialing string.
1. Select the number in the Phonebook list. The name and number appear in the display win-
dow.
2. Click
On/Off
button to dial the call.
Tip
: You can also double-click the number in the Phonebook list to initiate a call.
End a call
l
Click the
On/Off
button.
Redial a number
l
Click the
Redial
button.
Send a Flash signal
l
If your telephone service includes call transfer, call waiting or conference calling, you can
use the Flash key. Refer to your local telephone service provider for details.
- 29 -
Содержание interact 8i
Страница 1: ...INTERACT PRO AT 8i USER S MANUAL 1...
Страница 68: ......
