NETWORK CONNECTION
Network Connection allows you to connect to any INTERACT system on your network using an IP
address or a unique network name.
Using Network Find
Open the Network Find
l
Click the
Network Find
button on the toolbar (or located under
Tools/Network Find
).
Note
: INTERACT Software will automatically detect units located on the same
subnetwork. You only need to use Network Find to locate units outside of the
subnetwork. This is based on the assumption that your LAN is configured correctly.
If your LAN is
not
configured correctly, please refer to your IT Administrator.
Connect to a System on the Network
1. Enter the
IP Address
or
Network Name
of the system to which you want to connect.
2. Click
OK
.
3. You will see a Password Prompt window. Enter the
User Name
and
Password
of the net-
worked system.
4. Click
OK
. The system icon will appear in the Connection list and the Configuration screen will
open.
PHONEBOOK
INTERACT Software features a Phonebook utility which stores up to 20 phone numbers. These
numbers are also assigned a speed dial number for dialing convenience through the INTERACT
Controller. Phonebook entries are listed in alphabetical order, speed dial number or number. You
can add, edit or delete an entry from the Phonebook window.
Phonebook Edit
Open the Phonebook
l
Click the Phonebook button
on the toolbar (or located under
Tools/Phonebook Edit
).
Add a number
1. Click
Add
2. Enter the
Name
and
Number
.
3. Enter a
Speed Dial Number
(1-20). If you don't enter a speed dial number, INTERACT Soft-
ware will automatically assign one. Alternatively, the user can assign a speed dial number of
None
- this will not assign a speed dial number.
4. Click
OK
Delete a number
1. Select the entry you want to delete.
2. Click
Delete
Edit a Phonebook entry
1. Select the entry you want to edit, click
Edit
.
2. Make desired changes to the entry.
3. Click
OK
. Confirm the deletion.
- 14 -
Содержание interact 8i
Страница 1: ...INTERACT PRO AT 8i USER S MANUAL 1...
Страница 68: ......
