background image

CONNECT NETWORK BRIDGES

14

5. 

Reconnect to the stack with CONVERGE Console.  Download 4.X a second 
time to the units.  The units will reboot.

6. 

Units are fully upgraded.

7. 

Verify units have been upgraded by checking the firmware version on the 
front panel.

Reconnect all E-bus cables, if needed, to complete the stack of units.

PART NUMBERS

910-151-805

CONNECT CobraNet Network Bridge

910-151-804

CONNECT AVB Network Bridge

CLEARONE CONTACTS

HEADQUARTERS:

Salt Lake City, UT USA

5225 Wiley Post Way
Suite 500
Salt Lake City, UT 84116

Sales:

 

800-705-2103

Toll Free:

 800.945.7730

Fax:

 

801.977.0087

e-mail:

 [email protected]

TechSales

Tel:

 800.705.2103

e-mail: 

[email protected]

Technical Support

Tel:

 800.283.5936

e-mail: 

[email protected]

EMEA:

Tel:

 

+44 (0) 1189 036 053

e-mail: 

[email protected]

APAC:

Tel:

 

+852 3590 4526

e-mail: 

[email protected]

LATAM:

Tel:

 

801-974-3621

e-mail: 

[email protected]

Middle East:

Tel:

 

+852 3590 4526

e-mail: 

[email protected]

© 2013 ClearOne, Inc. All rights reserved.

Information in this document is subject to change without notice. 800-000-000-20-01 Revision 1.0 June, 2013

Содержание CONNECT AVB

















Отзывы: