ClearOne COLLABORATE LIVE 200, Руководство пользователя

Страница: 44 / 100

44 |
C O L L A B O R A T E L I V E : U s e r G u i d e
The Call Status box displays the following information for both incoming and outgoing
communication:
•
Video Format
– Video codec used to display video in this call
•
Video Resolution
– Video resolution used in this call
•
Video Bandwidth
– Bandwidth used by the video in this call
•
Video Frame Rate
– Video frame rate used in this call
•
Audio Format
– Audio codec used to sound audio in this call
•
Audio Bandwidth
– Bandwidth used by the audio in this call
•
Encryption Mode
– Type of encryption used in this call (if encryption is used)
•
Call Protocol
– Protocol of the current call
•
Packet Loss
– Percentage of packets that did not arrive at their destination
USING CALL TONES
When making calls the call operator can request a Password or DTMF tone to connect.
OPERATOR REQUEST FOR PASSWORD
The Operator can request you to enter a conference password to proceed with the call.
To enter a conference password, use the numeric pad on the remote control. The screen
shows DTMF message: "DTMF signal **** sent" representing the numbers pressed on the
keypad.
OPERATOR REQUEST FOR TELEPHONE TONE
The Operator can request you to connect using a dial-tone to proceed with the call.
To enter DTMF tone, use the numeric pad on the remote control to dial. The screen shows
DTMF message: "DTMF signal **** sent" representing the numbers pressed on the keypad.