9
Technical Support: 800.283.5936
INTERACT PRO MICROPHONE ARRAY SETUP
1. With the Interact software connect to the Interact Pro.
2. In the Interact Software go to the
Mic Settings
screen
3. Verify
P Pwr
(Phantom Power) is turned on. The Ceiling Microphone Array requires phan-
tom power for operation.
4. As a starting point set the
Coarse Gain
to 49 dB and the
Fine Gain
to 1 dB. Depending
on your application and the user to microphone distance, the gain settings may need to
be adjusted.
5. Click on the
Processing Tab
.
6. Enable the
NC button
and set the
Cancellation Depth
to 6dB.
7. Click on the
Filter button
for the first microphone input.
8. Add 3 filters
Filter 1 is a PEQ filter with the center frequency at 100 Hz with a gain of 5 dB and
a Q of 0.40
Filter 2 is a PEQ filter with the center frequency at 4000 Hz with a gain of -2 dB and
a Q of 0.27
Filter 3 is a Low Pass filter set at 12000 Hz
Содержание 910-001-013-W
Страница 1: ...PDF provided by Conference Room AV ClearOne 910 001 013W Ceiling Microphone Array Kit White...
Страница 2: ...Ceiling Microphone Array INSTALLATION MANUAL...
Страница 3: ......
Страница 20: ......