Clearance NFLS-x Series, Руководство по установке

Страница: 3 / 6

3
Power Supply Options (for Straight Run and Centerfeed/Loop Back Layouts)
Power Supply Options (for Array Layouts)
Maximum Length of LED Light Strip Based on Layout Type and Power Supply
Power Supply Straight Run Center Feed / Loop Back
6 Watt Not recommended
15 Watt
30 Watt
60 Watt
LED Light Strip power requirements are based on several factors, including the light strip layout and the length limitations of
light strip-type lighting. Refer to the guide below for choosing a power supply. It is recommended to choose a power supply
option in excess of your needs, since LED Light Strips cannot be overloaded. UL Listed Class 2 power supply required.
your connection wires. A leg can be a single LED strip or series of strips connected end-to-end.
Calculate the wattage for each leg by multiplying watts per foot by the length of LED lighting in the leg. Include only the
lengths of LED tape in your calculation, not the connecting wires. Add each leg’s wattage requirement together, and referring
to the chart below, determine the total watts needed to power your array and select the appropriate power supply.
Length of leg (LED tape light only)
Watts used per foot
Cutting, Connecting and Wiring
LED Light Strips can be cut in 5cm lengths, each containing 3 LEDs. Lengths are marked at cutting intervals by lines lying
between sets of soldering points, as indicated in the illustration below.
Positive Contacts Points
Negative Contacts Points
strips using solderless clamps.
-
form than soldering contacts, in some circcumstances,
soldering contacts may be necessary. For procedures such
as soldering and splicing, it recommended that you are
already familiar with basic wiring skills.
Contact Here
Soldered Contacts
Using Solderless Clamps/Soldering