Clear Vue Cyclones Pentz EF5, Руководство по установке

Страница: 6 / 17

5 Pentz EF5 Installation Guide
© Clear Vue Cyclones 2018
Specifications
6” Intake 8” Intake
System Performance
1,701 CFM at baseline static pressure
of 2.25”
1,935 CFM at baseline static pressure
of 2.25”
Footprint with Filters* 52” x 21-½” 52” x 21-½”
Footprint without
Filters*
45” x 21-½” 45” x 21-½”
Minimum Height** 107” 107”
Weight with Filters
Single Phase – 234 lbs
Three Phase – 284 lbs
Single Phase – 234 lbs
Three Phase – 284 lbs
Weight without Filters
Single Phase – 190 lbs
Three Phase – 240 lbs
Single Phase – 190 lbs
Three Phase – 240 lbs
Cyclone Construction
16 ga rolled black metal steel, powder
coated
16 ga rolled black metal steel, powder
coated
Blower Assembly 16” steel, backward-inclined impeller 16” steel, backward-inclined impeller
Cyclone Diameter 18” 18”
Intake Size
6” ID w/QF rolled edge (sized for
Nordfab ducting) – adapters available
8” ID w/QF rolled edge (sized for
Nordfab ducting) – adapters available
Intake Angle Upward, 9° Upward, 9°
Country of Origin USA USA
Assembly Time 2 hours, with 2 people 2 hours, with 2 people
Motor:
Manufacturer Leeson Motor Company Leeson Motor Company
HP Rating 5 HP, non-TEFC 5 HP, non-TEFC
Speed 3,450 rpm 3,450 rpm
Current
Single Phase – 20.8 FLA at 230V
Three Phase – 12.2 FLA at 230V
6.1 FLA at 460V Single Phase – 20.8 FLA at 230V
Three Phase – 12.2 FLA at 230V
6.1 FLA at 460V
Manual Overload
Protection
Yes Yes
Electrical:
Minimum Circuit Size
Single Phase – 30 amps
Three Phase – 15 amps at 230V
10 amps at 460V Single Phase – 30 amps
Three Phase – 15 amps at 230V
10 amps at 460V
Min. Recommended
Wire Size
10 gauge 10 gauge
Remote RF RF
Remote Range 60’ 60’
Filters:
Manufacturer
Wynn Environmental Wynn Environmental
Model # 9B300NANO 9B300NANO
Material
100% Nanofiber laminate 100% Nanofiber laminate
Area 300 sq ft each 300 sq ft each
Separation Efficiency 99.999% at 0.5 micron 99.999% at 0.5 micron
MERV Rating 15 15
Dimensions
12.75” OD x 34” H x 8.4” ID 12.75” OD x 34” H x 8.4” ID
* Dimensions based on intake positioned 180° from exhaust. Depth/width will vary depending on rotation.
** Height with 30-gallon drum. Add 6” for 55-gallon drum. A minimum of 6” of additional height is recommended for installation
purposes.