Clear-Com HME DX410, Руководство пользователя, Страница: 11 / 38

11
Charging the Batteries
Up to four batteries can be charged in the battery charger at one time. The battery status lights next to each charging port
indicate the battery status. Up to four fully charged batteries can be stored in the battery Storage ports. Insert a battery in
each of four Charging ports until it clicks in place.
h
A yellow light next to a Charging port indicates that the port is EMPTY.
h
A red light next indicates that the battery port is CHARGING.
h
A green light indicates that the battery is READY.
h
A steady yellow light indicates that the CHARGE FAILED. If a charge fails, refer to the instructions on the side
of battery charger.
h
A flashing yellow light next indicates CHARGE PENDING, which means the inserted battery is too hot. Adjust
the room temperature or move the charger to a cooler area.
h
Store fully charged batteries in storage ports.
NOTE: Batteries should not be left in charge ports after being fully charged. A battery left in a charging port for
more than three weeks may display the yellow indicator light, but it does not indicate a faulty battery.
Batteries in
Charging ports
Batteries in
Storage ports