Clear-Com Eclipse HX series, Руководство пользователя

Страница: 51 / 230

Eclipse | Upgrade Guide
Page 51
Installation (*.exe) file Description and comments
EHXDynam-ECSetup.exe The installer for the client version of EHX (both 32 and
64 bit machines) and Dynam-EC (both 32 and 64 bit
machines).
You can use the EHX Client version to connect:
•
Directly to a matrix in Client-only mode .
•
To an EHX Server in Client-Server mode .
EHXServerSetup.exe The installer for the server version of EHX (both 32 and
64 bit machines).
The EHX Server enables multiple EHX clients to work
together when configuring an Eclipse HX system.
Table 4-1: Installing EHX
Note: If you are required to uninstall and re-install EHX for any reason, ensure to save your
configurations for re-importing into EHX (see section below). You can uninstall EHX from
your Windows
All Programs menu.
EHX uninstall will stop and restart IIS during the uninstall process to remove any files
that are currently in use.
Additionally, if a PC only requires the installation of Dynam-EC then the standalone
installer for Dynam-EC should be used. See the section below.
4.4 Importing your configurations into EHX
The procedure below is only applicable if you are running EHX in Client-Server mode .
Tip: Remember to import any control macros which may be associated with a
configuration.
To import a saved configuration from ECS v5.2.5 into EHX:
1) Open EHX. From the top menu bar, select File > Import Project .
2) Navigate to the ECS v5.2.5 configuration ( *.ccn ) file saved to your hard drive.
To import the file, click Open .
Note: EHX can open
*.ccn
format files as well as its own
*.hxn
format configuration files.
To import a saved project from an earlier version of EHX or ECS into EHX in Client-only
mode:
3) Open EHX. Select File > Open .