Clear-Com Eclipse HX series, Руководство пользователя

Страница: 32 / 230

Eclipse | Upgrade Guide
Page 32
3.6 Upgrading from 8.0
The following table lists the procedures that you will require to upgrade from Eclipse HX v8.0 to Eclipse HX v9.1.
Important note:
The table lists the procedures in the order in which they must be carried out. To go to a procedure, click the cross-reference / link .
Order System component Upgrade procedure(s) Notes
1 E-QUE card
IVC-32 card
LMC-64 card 9.1 Identifying MK1 and MK2 E-QUE cards
9.2 Upgrading the E-QUE card (MK1)
9.3 Upgrading the E-QUE card (MK2)
The procedures used to upgrade
E-QUE cards to Eclipse HX v9.1
can also be used to upgrade IVC-
32 and LMC-64 cards.
No PROM or FPGA upgrade is
required.
2 E-MADI64 card 11.3 Upgrading the E-MADI64 application, DSP and FPGA code
using EHX
11.4 Upgrading the E-MADI64 FPGA using the Xilinx tool set
No DSP upgrade required.
(Note – if the E-MADI64 card
is upgraded before the CPU
Card then there is no E-MADI
card LED activity during the
upgrade. See E-MADI64
section for important upgrade
information).
3 E-FIB card No upgrade required.
4
Uboot
14.3
Manually upgrading V-Series Panels