Clear-Com Eclipse HX series, Руководство пользователя

Страница: 102 / 230

Eclipse | Upgrade Guide
Page 102
5. Power down the matrix.
6.7 Download a test configuration into the Eclipse
HX-PiCo using EHX
After you have upgraded your Eclipse HX-PiCo, Clear-Com recommends downloading a
test configuration to the matrix. Downloading a configuration will enable you to make
any further configuration changes you require using EHX over an Ethernet or serial
connection.
For more information, see your EHX User Guide .
6.8 Forcing the Eclipse HX-PiCo to the factory default
IP address
In rare situations, the CPU card may not be able to find a valid IP address for the
Ethernet port. To address this issue, force the matrix to the factory default IP address
(
169.254.0.100
) by using the Eclipse HX-PiCo menu system to enable DHCP.
For more information about using the Eclipse HX-PiCo menu system, see the Eclipse
HX-PiCo User Guide .
Alternatively, you can reset the Eclipse HX-PiCo to the factory default IP address with
the internal reset switches.
To force the Eclipse HX-PiCo to the factory default IP address using the internal
switches:
1. Set your PC Ethernet IP address to DCHP mode. Directly connect the PC to the
matrix using an Ethernet crossover cable.
2. To gain access to the internal reset switches, remove the lid of the Eclipse HX-
PiCo.
The device is live (powered) . Observe all electrical shock hazard
warning and precautions for handling electrostatic sensitive devices.