The CAT5 cable connecting the E1 port on the E-QUE rear card may be a crossover cable
or a straight-through cable depending on the requirements of the third party equipment. The
E-QUE interface should be set to
Direct
in EHX.
8.5 T1 trunking
The E-QUE interface card can provide T1 trunking between Eclipse systems and between
Eclipse systems and compatible third-party equipment.
T1 mode provides 24 channels of G.722 or G.711 encoded audio are available on each of
ports 1 and 5, giving 48 channels per card.
The T1 trunking specifications are:
•
B8ZS Encoding.
•
Extended Super Frame.
•
Long Haul Receive Signal Level.
•
T1 Long Haul (LBO 0 dB) Transmit Pulse Amplitude.
•
Balanced.
•
120 Ohm Line Impedance.
•
No Signaling.
•
G.722 or G.711 64 kbit/s Audio Encoding.
•
Tx Clock locally generated.
•
Rx Clock Line Recovered.
107
Eclipse HX-Median User Guide
Содержание Eclipse HX-Omega
