manualshive.com logo in svg

Clear-Com ECLIPSE EASI-PICO MATRIX, Руководство пользователя

Поделиться
Скачать
Clear-Com ECLIPSE EASI-PICO MATRIX Скачать руководство пользователя страница 7

E a s i - P i c o   U s e r   G u i d e

1

1. INTRODUCTION

WHAT IS EASI-PICO? 

The Easi-PiCo is a pre-configured entry-level 16-port matrix intercom system. 
The system is designed to allow person to person and one to many 
communications using the operator panels, wired beltpacks and external 
interfaces.

The user has the choice of 4 pre-configured system lay outs (maps), each using 
different numbers of panels, beltpacks or interfaces, which can be selected from 
the front of the matrix.   

The system has been designed to allow the user to setup the system without the 
need for any configuration software. 

The matrix system also comes with 2 x partyline channels and 2 x 4-wire 
channels for connection to external devices like mixers, external lines, camera 
CCU, 2-way radios etc.

The operator panels have been chosen for ease of use. 

Figure 1-1: Easi-PiCo Example Block Diagram

The customer can easily upgrade from the Easi-PiCo package by purchasing an 
upgrade Licence Key - this will provide full access to all 36 matrix ports and allow 
the user to fully configure the matrix using the ECS configuration software. This 

Содержание ECLIPSE EASI-PICO MATRIX










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды