manualshive.com logo in svg

Clear-Com ECLIPSE EASI-PICO MATRIX, Руководство пользователя

Поделиться
Скачать
Clear-Com ECLIPSE EASI-PICO MATRIX Скачать руководство пользователя страница 64

E a s i - P i c o   U s e r   G u i d e

5 8

11. UPGRADING 

The Easi-PiCo can be upgraded to a standard 36 port Eclipse PiCo by 
purchasing the upgrade pass code and ECS package. 

By upgrading the user will have the ability to:

•

Programme the panel keys to suit their requirement.

•

Change any of the default maps to suit their requirement.

•

Gain full access to all of the features found in the ECS configuration 
software.

•

Ability to use any panel or interface in the Eclipse range including the new 
10 digit display V-series panels.

Additional features after upgrade:

•

DTMF Inward Access.

•

Programmable VOX.

•

Intuitive ECS Programming Software.

•

Remote Frame Access via Internet/Ethernet.

•

Telephone Interface.

The upgrade provides the following items:

•

1 x Easi-PiCo passcode.

•

1 x ECS configuration software.

The upgrade gives the user access to all 36 ports at the rear of the PiCo matrix 
(note the ports 17-36 will be plugged in Easi-PiCo mode, these are easily 
removed).

Pass codes

Each Easi-PiCo matrix has a unique matrix ID encryption.

The Matrix ID number can be found on the System information screen, The 
user will need to supply this ID number to their respective sales person when 
placing an order for the Easi-PiCo upgrade password  & ECS package.

This Pass code can then be entered in the Pass code entry screen, using the set up 
knob, 

Once the upgrade is complete the matrix will reset and the splash screen will read 
"Eclipse PiCo" this confirms the upgrade. 

The user will then have access to a standard 36 port Eclipse PiCo 

ECS software

The upgraded Easi-PiCo gives the user the full access to ECS v4.1 or above, ECS 
(Eclipse Configuration Software) is a software package that gives the user 

Содержание ECLIPSE EASI-PICO MATRIX










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды