manualshive.com logo in svg

Clear-Com ECLIPSE EASI-PICO MATRIX, Руководство пользователя

Поделиться
Скачать
Clear-Com ECLIPSE EASI-PICO MATRIX Скачать руководство пользователя страница 32

E a s i - P i c o   U s e r   G u i d e

2 6

After you have connected a GPI, you can check whether or not the GPI is "on" 
directly from the front panel of the PiCo.

Figure 1-28: Easi-PiCo GPI Status Screen

Note:

The The GPI connector is not activated on the Easi-PiCo but can be 
accessed after upgrade.

GPO STATUS 

Figure 1-29: Easi-PiCo GPO Status Screen

A general purpose output or "relay" is a switch that you control remotely. The 
relay is preconfigured to close a contact whenever an intercom panel's RLY key is 
pressed. When the contact is closed, it completes an electronic circuit's signal 
path so that a remote device, such as a light, is powered. 

You connect the general-purpose outputs to the male 25-pin D-type socket 
labelled "GP OUT" on the back of the PiCo. 

After you have connected a GPO, you can check whether or not a GPO is "on" 
directly from the front panel of the PiCo. You can only toggle a GPO "on" or 
"off" directly from the Eclipse PiCo

The front panel display always shows the most current on/off status of the GPO, 
whether it has been produced by using the front-panel controls.

To check whether or not a GPO is on and/or to toggle a GPO on/off:  

•

From the Main menu, select STATUS. The Status menu appears. 

•

From the Status menu, select GPO. The GPO Status menu appears. 

•

If a GPO is "on" an "X" appears in the checkbox next to that GPO 
number on the menu. An unchecked box indicates that a GPO is "off." 

The GPO status menu always shows the current status of the GPO, regardless of 
whether the status changes by using the front-panel menu options.

To exit the menu, scroll to and select EXIT. 

GPI STATUS  

GPI 1 [   ]
GPI 5 [   ] 

 

 

 

EXIT  

GPI 2 [   ]

GPI 3 [   ]

GPI 4 [   ]

GPI 6 [   ]

GPI 7 [   ]

GPI 8 [   ]

GPO STATUS  

GPO 1 [   ]
GPO 5 [   ] 

 

 

 

EXIT  

GPO 2 [   ]

GPO 3 [   ] GPO 4 [   ]

GPO 6 [   ]  GPO 7 [   ]

 

GPO 8 [   ] 

Содержание ECLIPSE EASI-PICO MATRIX










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды