E a s i - P i c o U s e r G u i d e
1 7
1. From the Main menu, select CONFIGS. The Configuration menu appears
showing the names of each of the four onboard pre-configured maps.
2. Scroll to the desired configuration map's checkbox.
3. Press the setup/enter knob to select the configuration. An "X" appears in the
configuration's checkbox when it is selected. A screen appears asking you to
confirm your selection. Select Yes to confirm your selection or select NO or
EXIT to back out from the changes.
The Reset Options menu appears.
4. From the Reset Options menu, select one of the following.
APPLY AND RESET resets the system to the currently selected configuration,
while restoring active calls and activating any changes made from the PiCo's
front panel since the last reset.
CLEAR XPOINTS resets the system to the currently selected configuration,
while clearing active calls and clearing any changes made from the PiCo's front
panel since the last reset.
To exit the menu, scroll to and select EXIT.
BASIC PANEL KEY OPERATION
Making calls, (Talk keys)
Each configured Talk button (red) will be dim to indicate it has a programmed
label. When selected it will become bright RED to indicate it is active.
•
Choose destination of call and select the key assigned to that destination.
•
Push the correct key momentary to latch or push and hold for non
latching key action.
•
Then talk. Your command will come out of the destination loudspeaker
automatically (all the talk keys are talk only so the call destination will
have to operate a key to reply).
•
The Talk key LED will lit bright RED showing the key is active.
•
Release the key to end the call.
Receiving calls (Answering)
•
When another panel is calling you will hear the message via the headset
or the internal loudspeaker.
•
The panel key that is programmed to talk back to the caller will flash red
to indicate the caller.
•
To answer this call you can either press the assigned to talk back to that
destination which will be flashing red or by simply pressing the
answer-back key.
Содержание ECLIPSE EASI-PICO MATRIX
