HME # 400G752
Rev A 11/3/16
1301 Marina Village Parkway, Suite 105
Alameda, Ca. 94501 USA
www.clearcom.com
Quick Reference Guide
DX210
Power/Mode
lights
Power/Mode
lights
Power button
Power button
Button Functions
or
Power On/Off
To Intercom Channel 1, including 2-wire/4-wire connections
or
Increase Volume
To Intercom Channel 2, including 2-wire/4-wire connections
or
Decrease Volume
To All Wireless Headsets & Beltpacks, Base, ISO Relay and
AUX OUT (if activated)
Settings & Adjustments
All-In-One Headset
Lights Off:
Be sure Headset power is off.
Press & hold
while you press & release the
Power
button.
Beltpack Sidetone
Adjustment:
Press & hold
while you repeatedly press
to increase or
to decrease.
Beltpack
For Technical Support
In The Americas and Asia – Tel: +1.510.337.6600 or 1.800.462.4357 Menu option 1 – Hours: 8:00am-5:00pm Pacific Time
Email: [email protected]
In Europe, Middle East and Africa – Tel: +44.1223.815000 – Hours: 8:00am-5:00pm GMT
Email: [email protected]
All-In-One Headset
STATUS
REG
AUTO NULL
Local Headset Controls
Register Beltpack (BP) or All-In-One Headset (HS)
¾
Be sure
BP/HS
is turned off.
¾
Press
REG
button on base station.
–
STATUS
display on base station shows “o” for registration mode.
¾
On
BP/HS
, press and hold while you press / and then release all buttons.
– Power lights blink red, then green and go off, and one power light comes on green.
– Registration number appears on base station
STATUS
display.
AUTO NULL Adjustment
(only if using 2-wire interface)
¾
If echo is heard in wireless Beltpacks or All-In-One Headsets on
CH1
or
CH2
:
¾
Use pointed object (e.g. pen) to press & hold
CH1
or
CH2 AUTO NULL
button for 2 seconds.
CAUTION:
Before pressing the
AUTO NULL
button, be sure there are no open microphones
on the wired system. Notify wired system users that a loud noise may occur in their headsets
during the auto null adjustment.
The system may be out of operation for approximately 25 seconds during this adjustment.
Local Headset Communication
¾
SEL button
selects communication with
IC1
or
IC2
, or
IC1
&
IC2
or
ISO
.
–
IC1 or IC2, or IC1 & IC2 or ISO lights indicate selection.
¾
TALK button
–
Press & release quickly to “latch on” for open communication.
– Press & hold while talking for momentary communication – release when finished.
¾
VOLUME
control adjusts audio level in local headset earpiece.
¾
MIC LEVEL
control adjusts audio level going out from local headset microphone.
