Clear-Com CELLCOM 10, Инструкция по эксплуатации

Страница: 35 / 168

Vitec Group Communications
CellCom-10 Instruction Manual 3 - 1
OPERATING THE
CELLCOM 10 BASE
STATION
INTRODUCTION
The CellCom 10 base station provides all of the intelligence and signal
routing for the CellCom 10 digital wireless intercom system. The base
station is effectively a full-duplex digital matrix communications
system, with virtual “ports” for the wireless beltpacks rather than
physical ports.
In its memory, the base station contains all of the labels and
communications paths assigned to each CEL-BP beltpack, and this
information is sent to the beltpacks via the CEL-TA
transceiver/antennas as soon as they are switched on and recognized
by the base.
The base station also functions as the interface between wired and
wireless communication devices. The two party-line intercom
connectors, four 4-wire connectors, and program
input/stage-announce output each have their own full-duplex time slot.
They can be labeled, added to communication groups, and assigned to
beltpacks as desired.
UNDERSTANDING FRONT-PANEL OPERA-
TION
Figure 3-1: CellCom 10 Base Station Front Panel
3