Clear-Com CELLCOM 10, Инструкция по эксплуатации

Страница: 137 / 168

Vitec Group Communications
CellCom-10 Instruction Manual 1 0 - 9
CHANGING THE LABEL OF THE PORT
Select the port to be changed, then over-type the text in the label edit
box.
TYPE DROP-DOWN BOX
This is only active when a partyline port is selected. It allows the user
to select between Clear-Com, Drake and RTS wired beltpack settings.
This affects the gain, termination and call signaling used when
communicating with this port.
CALL ASSIGNMENT DROP-DOWN BOX
This is only active for headset, partyline and 4-wire ports. For a
frontpanel headset port, it specifies the port which is called when the
"Talk" button for that port is pushed.
For a partyline or 4-wire port, it causes a permanent talk path to be
created from the port to this destination.
INPUT AND OUTPUT LEVELS
The input level (a biasing factor applied to the audio mix of other users
which adjusts the level at which other users will hear this port) and the
output level (the level at which the port hears other users) can be
adjusted between -20 and +18dB.
GROUPS TAB
Figure 10-11: Groups Tab