Clear-Com CELLCOM 10, Инструкция по эксплуатации

Страница: 129 / 168

Vitec Group Communications
CellCom-10 Instruction Manual 1 0 - 1
CELLCOM 10
CONFIGURATION
EDITOR
INTRODUCTION
The Cellcom/Freespeak Configuration Editor can be used to extract,
backup, edit and restore configurations from the Cellcom/Freespeak
base units. Configurations are initially extracted from a
Cellcom/Freespeak base unit via the serial cable, and once extracted
they can be edited and either sent back to the base unit or saved to
disk for future use.
It can also be used to "clone" a base station in case of systems failure
- all beltpack registrations and the system ID are stored within the
config.
LOADING AND SAVING CONFIGURATIONS
On loading the configuration editor should display the initial screen:
Figure 10-1: Configuration Editor Initial Screen
10