CleanStar SS-103 Скачать руководство пользователя страница 6

Страница: 6 / 9

5) When using Steam Mop on carpets, place the mop head (with microfiber cloth) over the Carpet Glider.

NOTE: Do not operate without either Microfiber Cloth in place.

6) Hold the Mop at a 45°angle, open the water tank cover and add the water in the tank

7) Plug into a grounded outlet.

8) Once the unit have been fully assembled and filled with the water, plug in the power cord to a grounded electrical outlet. Power

switch(O/I) is in the OFF(O) position ,turn the power switch(O/I) to the ON(I) position. Wait approximately 20-35 seconds, the Mop will

Start emitting steam . To stop emitting steam, turns the Power Switch(O/I) to the OFF(O) position.

9) Slowly pass over surface to be cleaned. It is recommended to sweep or vacuum floor prior using the steam cleaner.

NOTE: It is recommended that another high wattage appliance is not operated on the same circuit to avoid a circuit overload.

CAUTION: To sanitize an area of your floor, leave the steam cleaner over an area for a minimum of 8 seconds, but no longer than 50

seconds. Leaving the Steam cleaner in a stationary position for a longer period than recommended may cause the build up of a pale

residue. This residue can be removed by using a decalcifying product or with a few drops of vinegar. (See troubleshooting guide)

WARNING: NEVER run the Steam Cleaner without water. NEVER direct steam at any person or animal. Use the Steam Cleaner

on sealed hard floor only.

10) When you finish your cleaning, unplug power cord from outlet, empty the water tank, carefully remove the cloth pad from the head,

wind Power Cord around the Cord Wrap and store it upright in a dry area or hang by the storage hook.

CAUTION: The Cloth Pad may be very hot.

Содержание SS-103









