Thank you and congratulations for choosing the Cleanstar SS-103 Steam Cleaner. The Steam Cleaner is a way of cleaning that is
effective and far more hygienic than conventional methods. The Steam Cleaner achieves a high degree of hygienic and increasing
cleansing power by converting water into steam using a microfiber floor cloth enhancing absorbency. When contact is made with floor
surfaces, dirt and grime can be eliminated in a matter of seconds. Since the Steam Cleaner uses the active power of steam without the
use of detergents or soap, it is environmentally friendly.
When used correctly the Steam Cleaner can kill dust mites and some types of bacteria. To disinfect a specific area, position the steamer
over the area for a minimum of eight seconds. The steam temperature will reach to approximately 90-100°C. Use this procedure to
disinfect floors in bathrooms, showers, around kitchen counters, pet sleeping quarters, etc.
Instructions
The Steam Cleaner is designed to thoroughly clean floor surfaces, such as marble, ceramic, stone, linoleum, sealed hardwood floors
and parquet.
WARNING:
On surfaces that have been treated with wax, the wax may be removed by the heat and steam action. Do not use on
unsealed wood floors or let unit stand on any wood floor for an extended period of time. This could cause the wood grain to rise. When
using on vinyl, linoleum or any other heat sensitive floors, use extra caution. Too much heat can melt down glue in the flooring. It is there
for recommended that a sample clean be carried out on an isolated area of the floor. It is also recommended that you check the use and
care instructions of the surface from the floor manufacturer to ensure suitability to steam cleaning.
Steam Mop uses tap water. Residents in areas with hard water, should use distilled water for better performance.
HOW TO ASSEMBLE AND USE
1) Attach the Mop head to the Main Body as follows:
Insert the swivel joint into designated hole in the Main Body until it locks in place with the lock button on the main body (you will hear a
clicking sound).
2) Insert handle down into the body until it locks in place with the lock button on the main body (you will hear a clicking sound).
3) Place the Microfiber Cloth Pad onto the mop head.
4) Fasten the Microfiber Cloth Pad by pulling the cord while pressing on Toggle.
Содержание SS-103
Страница 4: ...Full SS 103 Breakdown...
