background image

7. LOW VOLTAGE SYSTEM TECHNOLOGY 

LED status interpretation guide 

This Central Vacuum Power Unit is provided with an LED status indicator to keep you informed on the 
different states and functions during its operation. Reading the following table will allow you to identify 
the status of your appliance by the different behaviours of the LED. 
 

STATUS  COLOUR  LEGEND 

  

 

OFF 

The power cord is unplugged – No power. 

 

GREEN 

The power cord has just been plugged-in or the power has been 
restored. The LED will flash rapidly for a few seconds and will then 

become solid again

.

 

 

GREEN 

The power unit is operational. 

 

AMBER 

Stop the power unit, replace the bag and clean the permanent filter if 
required (after 15 hours of usage), reboot the unit by pressing the 

small button for 5 seconds. The LED will return to

 . 

 

RED 

The 500 hours motor inspection is now required, otherwise 
the motor may get damaged. 

 

 

RED 

Stop the power unit and have service done on the unit 
immediately at an authorized service center. 

    

 Slow blinking LED           

 Fast blinking LED       

 Solid – No blinking

 

 

8. SAFETY NOTES 

-Make certain that the work area is safe and clear prior to installing your new Central Vacuum Power 
Unit. 
-Wear the necessary safety clothing & equipment prior to start any work i.e goggles, gloves etc. 
-Use the right tools & in good working order: 
- Hammer 
- Phillips head screwdriver 
- Measuring tape 
- Level 
- Drill; with wood or concrete bit of 10mm 
- Pliers 
- Wire stripper 
 

For future references, take note of the following information: 
Serial number:____________________________________________ 
Date of purchase: _________________________________________ 
Purchased at: _____________________________________________ 
 
Please keep a copy of your invoice together with this manual 

 

Содержание NADAIR V600AL










Отзывы: