CleanStar ESCAPE Hybrid, Инструкция по эксплуатации

Страница: 11 / 16

11
Thermal Fuse Protection
(Model: V-ESCAPE-P)
The Cleanstar Escape Power (Model: V-ESCAPE-P) vacuum cleaner comes equipped with an Automatic
Reset Thermal Fuse Protector. This thermal protector is designed to protect your vacuum cleaner from
overheating should the airflow be blocked for extended periods. This may occur if the dust container is overfull,
if the filters have not been regularly cleaned or if the vacuum hose is blocked. The vacuum motor will stop
before it can get too hot. If this happens, empty and thoroughly clean the dust container and filters or free any
blockage and ensure that adequate airflow is restored. The motor will automatically restart after it has cooled to
a safe operating temperature after approximately 20 to 30 minutes.
(Models: V-ESCAPE-B and V-ESCAPE-H)
The Cleanstar Escape Battery (Model: V-ESCAPE-B) and Escape Hybrid (Model: V-ESCAPE-H) vacuum
cleaners come equipped with a Manual Reset Thermal Fuse Protector. This thermal protector is designed to
protect your vacuum cleaner from overheating should the airflow be blocked for extended periods. This may
occur if the dust container is overfull, if the filters have not been regularly cleaned or if the vacuum hose is
blocked. The vacuum motor will stop before it can get too hot. If this happens, empty and thoroughly clean the
dust container and filters or free any blockage and ensure that adequate airflow is restored. The motor will
automatically restart after it has cooled to a safe operating temperature after approximately 20 to 30 minutes.
To reset the thermal fuse:
1. Unplug the Backpack vacuum cleaner
2. Check for problem (over-filled dust container, clog in hose, clogged filters, etc.)
3. Correct the problem.
4. Locate the ‘tripped’ thermal reset button located on the bottom of the unit.
5. Using a pointed object, push the reset button.
6. Plug Backpack vacuum cleaner in and begin using.