EN
Instructions
Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
✆
+49 38851 314650 *)
*) Calls to German landlines are subject to charges. The cost varies
depending on the service provider.
All rights reserved.
Dear customer,
We are delighted that you have chosen our
cleaning mop set
.
Before using the product for the
fi
rst time, please carefully read
through these instructions and store them in a safe place.
If you have questions about the device or spare parts/accessories,
contact customer service via our website:
www.service-shopping.de
Explanation of Symbols
Safety instructions: Read these carefully and follow
them to prevent personal injury and damage to prop-
erty.
Explanation of the Signal Words
WARNING
warns of
possible
serious injuries and danger to
life
CAUTION
warns of slight to moderate injuries
NOTE
warns of damage to property
IMPORTANT NOTES
■
This product is suitable for wet cleaning all kinds of surfaces
(
fl
oors, stairs, furniture, etc.).
■
The product is designed for private use and is not intended for
commercial use. Only use it as described in the instructions.
Any other use is deemed improper.
■
WARNING – Danger of Suffocation!
Keep the article and the
packaging material away from children and animals.
■
CAUTION – Risk of injury associated with rotatable parts!
Do not leave children and animals alone with the device
without supervision.
■
CAUTION – Risk of injury!
Do not reach into the rotating
sieve and/or the mechanical parts behind the pedal.
■
Do not
fi
ll the bucket with too much water to avoid spilling water.
■
Use the carrying handle to move the bucket.
■
The mop attachment can be washed in the washing machine
at up to 60 °C. Do not use any softeners! Only air dry the mop
attachment – do not in any case do so in a laundry dryer or
with a hair dryer!
■
Only use accessories from the manufacturer.
■
Protect the device from heat sources, naked
fl
ames, sub-zero
temperatures, direct sunlight and impacts.
Product contents and product overview
(Illustration similar)
1
Upper part of the pole (with
handle)
2
Intermediate part of the pole
(2 x)
3
Bottom part of the pole with
mop
4
Mop attachment holder
5
Mop attachment
6
Removable
fi
lter
7
Hook for mounting the
fi
lter
8
Pedal
9
Rotating sieve
10
Carrying handle
1
2
3
4
10
9
8
5
6
7
Assembly
• Unpack the items supplied and check them for completeness
and for possible transport damage. If you should
fi
nd any
transport damage, do not use the article(!), but contact the
customer service department.
• Screw the 4 parts of the pole together.
• Removing
the
fi
lter from the bucket: Push the two side hooks
up. Then you can remove the
fi
lter.
• Inserting
the
fi
lter: Push the
fi
lter into the groove in the bucket
until it locks into place.
• Attaching the mop attachment:
1. Place the mop attachment on the
fl
oor.
2. Set the mop attachment holder at the bottom end of the
pole on the mop attachment’s plastic ring.
3. Push the pole down until the holder and ring audibly lock
into place.
• Removing mop attachment
1. Rotate the mop in the air and then place it on the
fl
oor so
that all the strands are spread out around it.
2. Fix the mop attachment in place by placing your feet on
the strands.
3. Firmly hold onto the bottom pole part and then swiftly pull
it up to release the mop attachment from the mop holder.
4. You can now wash the mop attachment out or replace it.
Use
1. Fill the bucket with water and a small amount of cleaner. Do not
over
fi
ll the bucket! Make sure that the cleaner you are using is
suitable for the surface to be cleaned.
2. Immerse the mop in the bucket.
3. Place the mop on the centering aid in the rotating sieve. The
strands must completely be located in the rotating sieve.
4. Gently hold by the handle so that the pole is in a vertical
position.
Do not push the pole down!
5. Quickly push the pedal down a few times. Make sure that you
lift your heel in the process; otherwise you may not attain the
speed needed to extract moisture from the mop.
6. If the mop is damp, but no longer wet, use it to mop the surface
you intend to clean as usual.
7. To rinse off the mop attachment, dip it back in the water and
move it up and down several times. Then wring it out as
described.
8. Once you have
fi
nished using the mop, you can remove the
mop attachment and wash it (see section “Assembly”). You
should also rinse the bucket out. We recommend you remove
the
fi
lter for this.
Variations
• Article number: 07203 (red)
• Article number: 09080 (black-white)
• Article number: 09746 (limegreen)
Disposal
Dispose of the packaging material in an environmentally
friendly manner and take it to a recycling centre. Dispose
of the product in an environmentally-friendly manner, too.
For more information, contact the administrative body in
your community.
Z PWM2K M DS V4 0718
