IMPORTANT!!!
Heated Sample Line
2
IMPORTANT!!!
BEFORE YOU BEGIN READ THIS!!!
READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS
SYSTEM!
SAVE THESE INSTRUCTIONS!!!
To Avoid Accidents…
Keep your work area clean and well lit.
Keep bystanders away.
Exercise common sense.
Electrical Safety
…
Do not operate in combustible environments.
DO NOT operate these products when wet or in water.
ALWAYS be sure that the components of this system are running with the
correct voltage (see section 1.1).
Never remove a grounding prong or modify a plug.
Do not cut or alter the heated sample line in any way.
Do not abuse the power cord or plug. Remove by handling plug only.
Personal Safety
…
The parts of this system are heated in excess of 500 degrees Fahrenheit.
Use caution when handling your equipment during and after a test.
Stay alert and watch what you are doing.
Dress appropriately. Wear the appropriate personal safety devices.
BE SURE to read all tags and stickers attached to the line.
Equipment Maintenance
…
Clean Air Express can not ensure that our Heated Sample Line is
compatible with any other temperature controllers but our own. It is
HIGHLY recommended that one of Clean Air Express’s digital temperature
controllers (0725RNT, 0725PM, 0725R) be used with this product. See
or call (800) 223-3977 for more information
Maintenance and repairs should be performed by one of Clean Air
Express’s trained technicians.
When removing the hose from its spool take care that the hose does not
kink. This may cause damage to the core.
While the line is hot or heating up it SHOULD NEVER come in contact
with itself. This can possibly result in permanent damage to the line.
Avoid wrapping the hose with tape or other insulating materials.