7500 Carbon Filter Installation & Startup Guide
Page 7
www.cleanwaterstore.com
Rev 083016
Build Your 3-Way Bypass:
The 7500 Does not come with a pre-made bypass; you have to build one yourself. Schedule 40 or 80
PVC, or Pex pipe is okay to use. You also can get a pair of flex lines- instead of the unions shown where
the Elbow Connector is, you could have slip by male fittings, then flex lines, then male nipples, and then
you do not have to worry about plumbing it with too much pipe deflection- this must be avoided, as
pipe deflection will put undue pressure on the control valve threads which may then crack.
7.
Next, you will need to program the system to work as a Carbon Filter. There are a few settings that
must be changed before the system can be put into service. Plug in the control valve and continue
on to the programming instructions.
