Clayton Tent & Vent TV-1400 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 24

Clayton Tent & Vent TV-1400 Скачать руководство пользователя страница 3

Repair or Warranty Contact

Clayton Associates, Inc. • 1650 Oak Street • Lakewood, New Jersey 08701 • P.+1-732-363-2100 F.+1-732-364-6084

TV-1400

www.DustlessMadeSimple.com

[email protected]

Page 3

The TV-1400 is designed to extract and filter wet paint overspray from enclosures or tents during painting operations where the removal of

overspray particulate, especially chromates, must adhere to the NESHAP Test Method 319 for Aerospace painting and de-painting operations.
The TV-1400 employs a specific set of Clayton filters that, when used together, provide filtration that passes the NESHAP Test Method 319 for

both liquid and solid phase particulate. For this reason, individual filter specifications are not listed.

Stage 1 - NESHAP Super High-Capacity Synthetic Overspray Arrestor

Stage 1 is a progressive density media, composed of 100% synthetic fibers, created especially for high volume coating operations. It effectively

removes overspray solids from lacquers, air dry enamels, and thermo-reactive coatings. Full depth loading provides up to 99.8% removal

efficiency with a Paint-holding capacity of 12 pounds.

Stage 2 - NESHAP Merv 8 Filter

Stage 2 is a progressive density media, composed of 100% synthetic fibers. It has durable internal steel support wires and is excellent for high

moisture applications.

Stage 3 - Pocket Filter

Stage 3 is a High Efficiency Multi Pocket Final Filter for Paint Booth Exhaust. It is designed for Aerospace painting and de-painting operations

where the removal of overspray particulate, especially chromates, must adhere to NESHAP Method 319 standards.

Stage 4 - Merv 8 Carbon Filter

Stage 4 is a High Efficiency MERV 8 Carbon/Particulate Filter designed to help adsorb VOCs. The Gas-Phase Filtration Media layer suspends

250g/m of activated carbon in a uniform distribution throughout a tightly bonded three-dimensional network of cotton & polyester fibers which

also capture the particulate contaminants.

System Performance Data

ONLY APPROVED CLAYTON FILTERS SHOULD BE USED.

APPLICATIONS & ENVIRONMENTS

Liquid Phase

Solid Phase

85.70% @.42 Microns

88.00% @ .70 Microns

96.10% @ 1.0 Microns 9

3.90% @1.1 Microns

98.60% @2.0 Microns

97.50% @ 2.5 Microns

Exceeds NESHAP requirements E

xceeds NESHAP requirements

«
1
2
3
4
5
...
»

Содержание Tent & Vent TV-1400

























Отзывы:

Нет отзывов