G3 Display 006 – 00001GF User’s manual
006-00001DSF rev.002 Clayton Power R&D, s.r.o.
7
G 13,4V
50W 3,7A
Figure 3: Display main screen description
3.3
Menu
3.3.1
Main menu
-
Boost Charge – During normal charge the Combi charge the battery to 14.4V. When
boost mode is active, the Combi charges battery to 15.4V. The Boost mode function is
automatically disabled when the 230vac mains grid is removed, making the Combi return
to normal charge.
The function is only used on flooded lead acid cells periodically to desulfate the cells.
This function should not be used on GEL or AGM batteries.
-
Version – shows version of G3 Display firmware and hardware
3.3.2
Genset menu
The Genset function makes it possible to automatically start a Generator when the battery is
empty and automatically stops when the battery is full.
The function requires a Combi in the system to handle the 230vac from the generator.
Figure 4: Menu item tree
Indication of
running generator
Indication of battery
charging
230V output power
Measured battery voltage
Battery current
“-“indicate discharging
Indication of 230VAC
output is available
