7 Assembly
To mount the device, perform the following steps:
TIP
Do not mount the device directly next to or above batteries.
Choose a cool, dry and well-ventilated mounting site.
1. Fasten the device to the 4 lateral holes (5 mm Ø).
ð
The device is mounted.
8 Installation
Fitting the Data Adapter
Fig. 3:
Data adapter
connectors
No.
Connection
1
Single wire
2
Wake-up signal (Ignition switch, terminal 15)
3
Ground
4
CAN High
5
CAN Low
TIP
It is not possible to operate the device without a wake-up signal
(Ignition switch, terminal 15).
A CAN connection must also be established in order to charge
lithium batteries.
10
LEAB Automotive GmbH
Thorshammer 6
24866 Busdorf
8 Installation
LEAB Automotive GmbH
