Clavister SG4500 Series, Руководство по началу работы

Страница: 29 / 87

3.2. Web Interface and Wizard Setup
This chapter describes the setup when accessing the CorePlus for the first time through a web
browser. The user interface accessed in this way is called the
Web Interface .
Note: Screenshot images are edited
Many of the screenshots in this section have had sections cut from the original image to
aid readability. However, all of the relevant informational content has been preserved.
Connect By Browsing to https://192.168.1.1
Using a web browser, enter the address https://192.168.1.1 into the navigation window as shown
below.
Important: Disable any proxy server and turn off popup blocking
Make sure the web browser doesn't have a proxy server configured.
Any popup blocking in the browser should also be temporarily turned off to allow the
setup wizard to run.
If there is no response from CorePlus and the reason is not clear, refer to the help checklist in
Section 3.6, “Troubleshooting Setup” .
The CorePlus Self-signed Certificate
When responding to an https:// request, CorePlus sends a self-signed certificate which will not be
initially recognized so it will be necessary to tell the browser to accept the certificate for this and
future sessions. Different browsers handle this in slightly different ways. In Microsoft Internet
Explorer the following error message will be displayed in the browser window.
To continue, tell IE to accept the certificate by clicking the following link which appears near the
bottom of the browser window.
In FireFox this procedure is called " Add a security exception ".
The Login Dialog
CorePlus will next respond like a web server with the initial login dialog page as shown below.
Chapter 3: CorePlus Configuration
29