Clavister SG4300 Series Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 68

Clavister SG4300 Series Скачать руководство пользователя страница 24

3.2. Web Interface and Wizard Setup

This chapter describes the setup when accessing the CorePlus for the first time through a web
browser. The user interface accessed in this way is called the Web Interface.

Note: Screenshot images

Many of the screenshots in this section have had sections cut from the original image
to aid readability. However, all of the relevant informational content in the images has
been preserved.

Connect By Surfing to https://192.168.1.1

Using a web browser (Internet Explorer or Firefox is recommended) enter the address
https://192.168.1.1 into the navigation window as shown below.

Check for a proxy server and turn off popup blocking.

Make sure the web browser doesn't have a proxy server configured.

Any popup blocking in the browser should also be temporarily turned off to allow the
setup wizard to run.

If there is no response from CorePlus and the reason is not clear, refer to the help checklist in
Section 3.5, “Troubleshooting Setup”.

The CorePlus Self-signed Certificate

When responding to an https:// request, CorePlus sends a self-signed certificate which will not be
initially recognised so it will be necessary to tell the browser to accept the certificate for this and
future sessions. Different browsers handle this in slightly different ways. In Microsoft Internet
Explorer the following error message will be displayed in the browser window.

To continue, tell IE to accept the certificate by clicking the following link which appears near the
bottom of the browser window.

In FireFox this procedure is called Add a security exception.

The Login Dialog

CorePlus will next respond like a web server with the initial login dialog page as shown below.

3.2. Web Interface and Wizard Setup

Chapter 3. CorePlus Configuration

24

«
...
22
23
24
25
26
...
»

Содержание SG4300 Series





































































Отзывы:

Нет отзывов