Clavister NetWall W20A, Руководство по началу работы

Страница: 11 / 89

1.3. Interfaces and Ports
This section is an overview of the W20B product's external design.
Figure 1.2. Clavister W20B Connection Ports
The W20B features the following connection ports on the front panel:
• 6 x RJ45 Gigabit Ethernet interfaces with the logical cOS Core names G1, G2, G3, G4, G5, and
G6.
The G1 interface is the default interface for management access over a network. However, it
can be used for other purposes.
• The W20B has a USB mini-B connector for console connection. This port is used for direct
access to the cOS Core
Boot Menu and the cOS Core Command Line Interface (CLI). Connection
to this port is discussed in Section 3.5, “Mini-USB Console Port Connection” .
Note: The two USB Type A ports are not currently used
The two USB Type A ports on the W20B front panel are for future functionality and are
not currently used by cOS Core.
All the Ethernet interface ports function independently of each other and are not connected by a
switch fabric. All are capable of link speed auto-negotiation and can operate using 10Base-T,
100Base-Tx, or 1000Base-T. The interfaces names are written by each interface.
Figure 1.3. W20B Interface Ports
The full connection capabilities of all W20B Ethernet interfaces are listed in Appendix A, W20B
Specifications .
Status Indicator LEDs
On the right hand side of the front of the W20B are two status LEDs. These indicate the following
conditions:
• I - Orange when power is applied.
Chapter 1: W20B Product Overview
11