Clavister NetWall 6000 Series Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 99

Clavister NetWall 6000 Series Скачать руководство пользователя страница 57

B. DHCP - automatic configuration

All the required IP addresses for Internet connection can, alternatively, be automatically retrieved
from an ISP's DHCP server by enabling the

DHCP Client

option for the interface connected to the

ISP.

Note that on the NetWall 6000 Series, a DHCP client is enabled in the default cOS Core
configuration on the

G8

interface. Enabling DHCP is described here in case it needs to be

manually enabled.

A DHCP client is enabled by first selecting

Network > Interfaces and VPN > Ethernet

to display

a list of all the interfaces.

Click the

G2

interface in the list to display its properties and select the option to enable the

interface as a DHCP client.

Usually, a DHCP

Host Name

does not need to be specified but can sometimes be needed by an

ISP to uniquely identify the firewall as a particular DHCP client for the ISP's DHCP server.

On connection to the ISP, all required IP addresses are retrieved automatically from the ISP via
DHCP and cOS Core automatically sets the relevant address objects in the address book with this
information.

For cOS Core to know on which interface to find the public Internet, a

route

has to be added to

the

main

cOS Core routing table which specifies that the network

all-nets

can be found on the

interface connected to the ISP and this route must also have the correct

Default Gateway

IP

address specified. This

all-nets

route is added automatically by cOS Core during the DHCP

address retrieval process.

After all IP addresses are set via DHCP and an

all-nets

route is added, the connection to the

Internet is configured but no traffic can flow to or from the Internet since there is no IP rule set
entry defined that allows it. As was done in the previous option (

A

) above, we must therefore

define a rule set entry that will allow traffic from the source network and source interface to flow
to the destination network

all-nets

and the destination interface.

C. PPPoE setup

For PPPoE connection, we must create a PPPoE tunnel interface associated with an Ethernet
interface. Assume that the Ethernet interface is

G2

and the PPPoE tunnel object created is called

wan_pppoe

. Go to

Network > Interfaces and VPN > PPPoE

and select

Add > PPPoE Tunnel

.

These values can now be entered into the PPPoE tunnel properties dialog.

Chapter 4: cOS Core Configuration

57

«
...
55
56
57
58
59
...
»

Содержание NetWall 6000 Series




































































































Отзывы:

Нет отзывов