Clavia Nord Wave 2, Руководство пользователя

Страница: 15 / 40

4. Panel RefeRence | 15
lIST OPTIOnS
The Program list can be navigated either numerically by pressing Num
(Program 2 button), alphanumerically – Abc (Program 3 button) or by
category – Cat (Program 4 button).
nUMeRIc
In numeric mode programs are displayed by their order in the Program
banks. The dial and the
PAGE
buttons can be used for navigating the list.
aBc
In abc (alphanumeric) mode programs are instead ordered by name. By
pressing down on the abc soft button, as indicated by the “
6
“ symbol,
a specific letter or number can be jumped to by selecting it with the dial.
caTeGORY
In category mode, programs are sorted by their category. By pressing
down on the cat soft button, as indicated by the “
6
“ symbol, an
alphabetically sorted list of categories is displayed, as shown in the
below picture. The dial can be used for selecting the desired category.
In Cat sort mode, the Page buttons can be used for quickly jump-
ing to the first program in the next category. Pressing Shift while
turning the dial is another way to jump to the next category.
lIVe MODe
The nord Wave 2 has five easy-to-access live program
locations, differing from other programs in that any edits
to them are
automatically stored . When leaving a live
program or powering off the machine all edits are saved,
without the need for a manual Store operation. To select
a live Program, press
LIVE MODE
and then any of the 1-5 buttons in the
Program area.
The selected live program can be stored to a program bank location,
using the standard Store methods (see previous page for details). con-
versely, a regular program can also be stored to a live program location
laYeR InIT
On the first page of the
LAYER INIT
menu (Shift + live button), layers can
be initialized to the default values for each panel section. Press Ok to
initialize the active layer and press All to do this for all 4 layers. note that
the oscillator selection is not reset.
laYeR SWaP
from the layer Init screen, use the PAGE
4
button to access the layer
Swap function. from here any layer can load the contents of another
layer, in the loaded program. Use the
A
-
D
soft buttons (Program 2-5
buttons) to focus a layer, and turn the
VALUE
dial to select a layer whose
settings should replace those of the focused layer.
In the example below, the Program has three active layers (a, B, c) and
the settings from layer a have been applied to layer B.
LAYER SWAP
D C
Num
B A
A A C -
Layer Layer Layer
The original settings of all layers are always available in the Layer
Swap function when turning the Value dial, even if settings have
been replaced with those of other layers.
PROGRaM BUTTOnS
The five PROGRAM buttons give you immediate access to a range of five
programs within the current program bank, when the default Page
Based program button mode is set in the System menu. When the
numeric Pad program button mode is selected, these buttons are
instead used to enter digits between 1-5. Read more about numeric
Pad program button mode above.
WHaT IS a PROGRaM?
a program stores and contains all settings made on each of the 4 layers,
except for Master level. To understand the internal architecture of the
nord Wave 2, keep the following in mind:
• for each layer, settings for all parameters affecting the sound, includ-
ing all effects are independent.
• Splits, all settings made in the layer control area, and Morph assign-
ments are also part of a Program.
SYSTeM, SOUnD, MIDI MenUS
With Shift pressed, The PROGRAM 1-3 buttons are used to enter
the System, Sound and MIDI menus respectively. Menu settings are
described in the Menu chapter beginning on page 31.
ORGANIZE
is described in the following section. The
PATTERN
editor is described
under arpeggiator/Gate on page 18.
Program Bass
A:24 Ac Guitar Finger
A:25 Mini M Bass 4
A:31 Gate Filter Whl
A:32 Pacific Pad Whl
Cat Abc
Num
Program B
F:32
E:53
D:32
I:25
Bowed Pad Whl
Brass Sfz Whl
Brass String Whl
Briano
Cat Abc Num
Program Category
Lead
Organ
Pad
Pluck
Cat Abc Num