background image

  

 

61000663 Iss 03 

ScreenZone 

HE8409, 8412 & 8418 

Large Commercial 

Electrically Heated Recessed Air Curtains 

With Energy Saving Controls 

Installation and Operating Manu-

INDEX

                                                                                   

Section

 

 

Installation Requirements  ---------------------------------------------------- 1 
Dimensions  ---------------------------------------------------------------------- 2 
Technical Specifications  ------------------------------------------------------ 3 
Wiring Details  ------------------------------------------------------------------- 4 
Energy Saving Configuration -------------------------------------------------5 
Installation Details  ------------------------------------------------------------- 6 
Servicing & Maintenance  ---------------------------------------------------- 7 
Spare Parts  ---------------------------------------------------------------------- 8 
Fault Finding  -------------------------------------------------------------------- 9 
Parts Replacement  ----------------------------------------------------------- 10 
User Instructions  -------------------------------------------------------------- 11 

WARNINGS

 

 

1 This appliance must only be installed by a competent person in accordance with the requirements 

of the Codes of Practice or the rules in force. 

2 All external wiring MUST comply with the current IEE wiring regulations. 

3 Warning this appliance must be earthed.  

Instruction Manual 

Содержание ScreenZone HE8409

























Отзывы: