w w w . c l a s s i c
e x h i b i t s . c o m
866.652.2100
© 2011
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
Order #XXXXX - MOD-1181 - Assembly
Graphic Insert
Insert
Insert
Insert
Door
See Detail
1
1A
2
4
3
2A
6
5
5
6
5A
6
5
6
5
Steps:
1) Connect upper vertical [1A and 2A] to lower verticals [1 and 2] as shown.
2) Connect lower horizontal pieces [5 and 6] between vertical extrusions [1 thru 4] as shown below.
3) Place insets and door between vertical extrusions [1 thru 4], attaching middle horizontals [5, 5A, and 6] atop inserts.
4) Place Graphic insert in place, connect upper extrusion [5] between verticals [1A and 2A].
5) Place internal into counter placing atop velcroed shelf supports.
6) Place counter atop assembled base.
Item
1/1A
2/2A
3
4
5
6
Qty.
1/1
1/1
1
1
4/1
4
Description
42’h Vertical Extrusion
42’h Vertical Extrusion
37.5"h Vertical Extrusion
37.5"h Vertical Extrusion
15.5”w Horizontal Extrusion
13.5”w Horizontal Extrusion
Step 1
Step 2
Step 3
Step 4
Steps 5 & 6
Door
Hinge
Hinge
Door Attachment
Slide pin into
hinge attached
to vertical.
Slide door
hinge atop pin.
