w w w . c l a s s i c
e x h i b i t s . c o m
Step 6
Page 6 of 6
866.652.2100
© 2013
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
Order #38907 - iPad Kiosk Assembly
Lock
Infill
2
3
4
1
When assembled
*
*
Attach connector piece to tray
as shown. Then connect
assembled pamphlet
tray to vertical extrusion.
Adjustable Pamphlet Tray Attachment
Tighten Lock
to Secure
Wire
Access
iPad
Lock
Lock
Foam Lining
Removed
Home Button Shield
Optional Cover for Home Button
1) Remove foam lining from inside bottom of
clam shell as shown.
2) Attach Home Button Shield with double-sided
tape to inside of clam shell, keeping top of
shield flush with clam shell opening as shown.
NOTE
: This is a permanent fix and can’t be easily
removed.
Steps:
1) Slide infill between stand verticals as shown.
2) Attach horizontal [2] between stand verticals.
3) Attach base [1] to stand verticals using bolts.
4) Attach square plate [3] to stand using bolt.
5) Attach clam shell [4] to square plate [3] using hex nuts.
6) Insert iPad and feed wire through hole.
7) Attach pamphlet trays to stand. Refer to detail.
Clam Shell
Stand
Base
Plate
Square
Plate
Hex
Nuts
Tools Required:
1) Hex Tool
2) Pliers
