© 2019
Step 1 of 2
Order #XXXXX
Item
1
2A,2B
3A,3B
4A,4B
5A,5B
6A,6B
Description
Base Plate
42” Vertical Extrusion w/ Clamps
42” Vertical Extrusion w/ Clamps
45” Horizontal Extrusion
45” Horizontal Extrusion
2.5” Angle-Cut Vertical Extrusion
Qty.
2
1,1
1,1
1,1
1,1
1,1
Horizontal Placement
Stopper
Set upper horizontal extrusion
on top of stopper of verticals.
1
1
3A
3B
B
B
2A
2B
4B
4A
5B
5A
Velcro
on
Back/Bottom Edge
Velcro
on
Back/Top Edge
Velcro
on
Back/Inside Edges
of Verticals
Connection Bar A
A
Completed Backwall Assembly
FRONT VIEW
Slide connection bar between
extrusions, then turn knobs
clockwise to tighten lock.
Straight Connection
with Knobs
Do not over tighten Knobs
Knob
Knob
Corner Connection
with Knob
Turn knob clockwise
to tighten lock.
Do not over tighten Knobs
Knob
Keep connection bars [
A
] attached to
[
4A
] [
5A
] and [
B
] to [
2A
] [
3A
].
6B
6A
Set Screw
Connector
Back View of Backwall
Insert connector into groove
of vertical extrusion, then
tighten set screw to secure.
Velcro
2.5” Angle-Cut
Extrusion Attachment
*
*
*
Keep [
6A
] attached to [
2B
] and [
6B
]
attached to [
3B
].
Velcro on extrusions
must face to
BACK
of
assembled Backwall.
Steps:
1) Attach base plates [1] to verticals [2A] and [3A], using bolts.
2) Connect verticals [2A to 2B] and [3A to 3B] with connection bars [B].
See
Straight Connection with Knobs
detail.
3) Connect horizontals [4A to 4B] and [5A to 5B] with connection bars [A].
See
Straight Connection with Knobs
detail.
4) Connect vertical assemblies [2A/2B] and [3A/3B] to horizontal assemblies
[4A/4B] [5A/5B]. See
Corner Connection with Knob
detail.
5) Attach graphic to
Velcro
on back of assembled Backwall.
Clamp
Keep clamps attached to [
2A
] [
2B
] [
3A
]
and [
3B
].
VK-1222 Backwall Assembly
