11
Intro Folding Panel System
866.652.2100
1.
2.
3.
Curved Counter Set-up Instructions
Slide panel sections together. Slide U
shaped clip into holes on top & bottom of
panels to hold together. Then lay counter
top on panels. Adjust counter top by lining
panels into channels on bottom of counter
top. Use hinged panel tie to further stiffen
unit if needed.
Stand section with wing
panel on the floor and
from the rear connect
the flexible panels by
guiding the pins into the
receiving holes (align
bottom hole then top).
Slide bottom
pins in first
Repeat step one with
panel section without
wing panel.
Slide bottom
pins in first
Slide panels
together
Set counter top on
while lining panels into
channels on bottom
of counter top
Optional retractable
shelf for keyboards
Slide clip into
holes on top & bottom
of panels
.
.
