11
PARTS NEEDED
TOOLS NEEDED
1
/
2
in. Box
Wrench
OR
OR
1
/
2
in. Socket
Wrench
Adjustable
Wrench
1
K
Note: It may be necessary to loosen nuts on lower mounting posts [K] in order to slide
upper mounting posts [J] into position. Be sure to tighten both nuts after positioning.
J
Side of Snow Cab
shell pulled aside
for visibility
INSTALL ASSEMBLED CAB ON LOWER MOUNTING POSTS (FIG.
1
)
ADJUSTING SNOW THROWER CAB ANGLE (FIG.
2
)
CAUTION: No part of the fabric cab skin should touch the engine or exhaust system of your snow thrower.
STEP
7
2
Loosen nuts on upper mounting posts [J] to adjust cab to proper angle
so that the mounting bar ends [C] are parallel to the ground.
J
