CLAS OH 5304, Руководство пользователя

Страница: 9 / 14

OH 5304
HYDRAULIC FLOOR JACK 2T 85mm
MAINTENANCE
EXPLODED VIEW
2. Lowering: Opening release valve by slowly turning release knob counterclockwise (never more
than 1/2 full turn of the handle) (please see illustration "F"). Only until the saddle reaches its lowest
position, then move the jack out of the vehicle.
1. Keep the jack clean and apply lubricating oil to all pivoting sections every three months.
2. Frequently check oil level (please refer to "Instructions Before Use").
3. Check pump piston and piston rod periodically for signs of rust or corrosion. Clean exposed
area with a clean oiled cloth.
N° Description Qty. N° Description Qty.
1 Nut M12 6 20 Main pivot pin 1
2 Spring washer Ø12 4 21 Hydraulic unit assembly 1
3 Washer Ø12 2 22 Handle sleeve pin 1
4 Front wheel 2 23 Cotter pin (2) 1
5 Front wheel bushing 2 24 Pump piston pin 1
6 Side plate (left) 1 25 Cotter pin (1) 1
7 Retaining ring Ø12 4 26 Handle sleeve 1
8 Parallel link a 27 Grip handle 1
9 Snap ring 2 28 Handle 1
10 Lift arm assembly 1 29 Returan spring 1
11 Retaining ring Ø13 1 30 Nut M8 2
12 Saddle 1 31 Spring washer Ø8 2
13 Frame tie rod 1 32 Washer Ø8 4
14 Front wheel axle 1 33 Bearings 2
15 Mandril 1 34 Rear castor assembly 2
16 Side plate (right) 1 35 Screw M8x14 2
17 Middle axle 1 36 Spring washer 2
18 Carrying handle 1 37 Retaining ring 2
19 Cover plate 1 38 Cross head pin 1