20
E
n
g
li
s
h
Care and maintenance
Use a soft damp cloth to wipe the product. Never use solvents or strong detergents.
Troubleshooting guide
Problem
Possible cause
Solution
The device does
not start.
The car’s ignition is not turned on. Turn on the ignition.
The fuse is broken.
Check and change the fuse.
The disc cannot
be played.
The disc is wrong.
Try another disc.
The disc is not properly inserted.
Insert the disc with the text up.
The disc is dirty.
Clean the disc.
The car’s interior is too hot.
Wait until the car has
cooled down.
Condensation on the lens.
Turn off the device and
wait an hour.
No sound.
The volume is turned down.
Adjust the volume.
The speakers are not connected
properly.
Check the connections.
The buttons do
not work.
The micro processor may need to
be reset.
Press “Reset” behind the
front panel.
The front panel is loose.
Attach the front panel properly.
The sound
disappears.
The device is angled too much
(max 30°).
Adjust the installation.
The disc is dirty or faulty.
Clean or replace the CD.
No radio
reception.
Antenna cord is not connected.
Check the connections.
The signals are too weak.
Choose another
frequency/station.
The display will
show ERROR 1.
The micro processor may need to
be reset.
Press “Reset” behind the front
panel.
An echo is heard
during calls.
The volume is set too high.
Reduce the volume to under 30.
The clock dis-
plays no time
(”NO CLOCK”).
The clock is set automatically by
the RDS information The radio
station may not be transmitting
RDS information or the reception
is too weak.
Switch to a stronger signal.
