1
2
3
4
7
5
6
3D Printing Pen
Art.
no 38-8850 Model RP560A
Please read the entire instruction manual before using the
product and then save it for future reference. We reserve
the right for any errors in text or images and any necessary
changes made to technical data. In the event of technical
problems or other queries, please contact our Customer
Services (see address details on the back).
Safety
Do not touch the nozzle of the pen as it will become very
hot during use.
• This product is not a toy.
• The product must only be used by persons over the age
of 14 years.
• Never leave the product unattended while it is switched
on, especially within reach of children.
• Only use materials that have been recommended in this
instruction manual.
• Never use the product if it has been damaged in any way.
• Never try to open the product, repair, dismantle or modify
it in any way.
• Repairs must only be carried out by qualified service
technicians and only using original spare parts.
Product description
1. Nozzle
2. [+//-] Feed speed selector
3. [ON/OFF,
] On/off, reverse – hold in for at least 3
seconds to reverse the filament feed.
4. Filament input port
5. Indicator light: Orange: The pen is in warm-up mode
Green: The pen is ready for use
6. [
] Forward filament feed
7. USB cable
Instructions for use
Important The end of the filament must be cut
square before it is fed into the pen.
1. Connect the USB cable (7) to the pen and then to a 5 V, 2
A USB power adapter (sold separately).
2. Press [ON/OFF] (3). The indicator light (5) will shine orange
and the pen will begin to warm up.
3. When the indicator light (5) shines green, the pen is ready
for use.
4. Push the filament into the input port (4) as far as it will go
and then press [
] (6) once to feed the filament forwards.
It will take a few seconds for the filament to start coming
out of the nozzle.
5. Press [
] (6) to stop the filament feed.
Automatic standby mode
If the Forward filament feed button has not been pressed for 2
minutes, the pen will automatically switch off and the indicator
light will go out. Pressing the ON/OFF button will switch the
pen back on again.
