E
n
g
lis
h
GREAT BRITAIN •
Customer Service Contact number: 08545 300 9799, e-mail: [email protected], internet: www.clasohlson.com/uk
V
er
. 20
1209
LED Wreath with
Light Sensor
Art.no 36-4190
Please read the entire instruction manual before using
the product and save it for future reference. We reserve
the right for any errors in text or images and any necessary
changes made to technical data. If you have any
questions regarding technical problems please contact
Customer Services.
Product description
• LED Wreath with light sensor.
• Control unit with push button selectors.
• Power supply: 4 x AA/LR6 batteries (sold separately)
Inserting batteries
1. Open the wire cage and remove the control unit.
Note:
Make sure the cables to the unit are not damaged.
2. Remove the cover
from the control unit.
The control unit lid
screws are located in
a plastic bag inside
the control unit.
3. Insert batteries according to the polarity markings
and screw the lid on securely using the screws.
4. Carefully insert the control unit into its wire cage with
the cable side first. Then lay the entire unit securely into
place inside the cage.
Note:
Be careful not to damage
the cables.
Note:
Make sure that the light sensor is free and clear and
unobstructed by the wreath. The sensor is located at the end
of the short cable extending from the battery unit. The sensor
can be pointed in any direction. Find the best direction to
point the sensor ends to avoid car headlight, etc.
Storage
Remove the batteries from the product if it is not to be used
for an extended period.
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local authority.
Operating instructions
Selecting the desired function:
1. Press [ON] (1) – For continuous light.
2. Press [SENSOR AND TIMER] (2) – For sensor activated
and timed lighting.
- If the senor is exposed to natural or artificial light it
will turn off.
- LEDs will turn on automatically when dark.
The timer is set to light for 6 hours (or until light
strikes the sensor).
- If the sensor is struck by light during darkness, e.g.
a car’s headlights. The timer will restart and activate
the lights for another 6 hours or until it becomes light.
1
2
3
- If the sensor is only exposed to darkness, the timer
will turn on the LEDs automatically after 18 hours.
The wreath will then be lit for 6 hours and off for
18 and continue with this cycle.
3. Push [OFF] (3) to turn off the lights completely.
5. Close the cage.
