Clarke Strong-Arm CH2500B, Инструкция по эксплуатации и техническому обслуживанию

Страница: 6 / 16

6
UNPACKING AND ASSEMBLY
Unpack your hoist and make sure that the following items are present. Should
there be any damage caused during transit contact your Clarke dealer
immediately.
• 1 x Hoist Assembly
• 1 x Hook / Pulley Assembly
• 2 x Mounting Brackets
• 1 x Fixings pack
• 1 x Instruction manual (this book)
INSTALLATION
The hoist is provided with specially designed brackets allowing it to be
attached to box sections or rectangular beams.
Beam dimensions must be carefully
calculated and all mountings must
be of adequate size and capable of
sustaining the maximum load of the
hoist, plus the weight of the hoist and
mountings.
If there is any uncertainty. You should
consult a qualified engineer.