Clarke Strong-Arm CFT5, Инструкция по установке, эксплуатации и обслуживанию

Страница: 3 / 8

3
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
SAFETY PRECAUTIONS
1. Do not exceed the rated capacity of the jack.
2. Do not allow personnel to operate the jack unless they have read these
safety precautions.
3. Ensure that the jack is in good working order. Have any damaged parts
repaired or replaced immediately. Use genuine Clarke parts only. The use
of unauthorised parts may be dangerous and will invalidate the
guarantee.
4. Do not operate the jack if damaged.
5. Use the jack in a suitable, well lit work area.
6. Keep the work area clean and tidy and free from unrelated items.
7. Use the jack on level and solid ground, preferably concrete. Avoid soft/
unmade ground as the jack may sink in.
8. Ensure the vehicle is securely and rigidly supported.
9. Ensure all non-essential persons keep a safe distance whilst the jack is in
use.
10. Ensure there are no personnel or obstructions under the vehicle before
lowering.
11. Do not stand or work under the load until it secured by suitable means.
12. Ensure when lifting, that the jack and all parts of the load can be clearly
seen.
13. Never climb on, or attempt to ride on the jack.
14. Take care not to trap fingers in the moving parts of the jack.
15. Lower the load as much as possible before moving the jack. Do not
transport loads in an elevated position.
16. Ensure that you can see the saddle and jacking point throughout the
jacking operation in case there is any relative movement.
17. Never tamper with the product or modify it in any way, as this could prove
to be dangerous and will invalidate the guarantee. Only use the product
for the purpose for which it is intended.
18. Use appropriate safety equipment, such as protective footwear, when
using this jack.
19. When replacing parts, use only those supplied by Clarke International.