Diamond Core Drills
CLARKE core drills are vibrationless when used as directed.
Core drills are used to form holes in, brick, concrete blocks, aerated blocks, asphalt, Cotswold
stone and limestone.
A heavy duty drill with a ½ chuck, low speed and high torque must be used with diamond core
drills.
NEVER USE HAMMER ACTION WITH DIAMOND CORE DRILLS
CLARKE GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase.
Please keep your receipt as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for
the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission.
This guarantee does not effect your statutory rights.
Core Drills In The Clarke Range
Model
Dia
Length
SCD28
28mm
300mm
SCD38
38mm
150mm
SCD52
52mm
150mm
SCD78
78mm
150mm
SCD107
107mm
150mm
SCD117
117mm
150mm
SCD127
127mm
150mm
NOTE
All core drills larger than 28mm must be used with an arbor and pilot/guide drill, these
are sold separately and can be purchased from your nearest Clarke dealer
0303
